Smithy58 Posted September 23, 2015 Share Posted September 23, 2015 Good dayi have a n gauge dapol HST loco which uses two decoders, do I have the loco and the dummy on the programming track at the same time or do I do them separately And give them the same id no?thanks in advance regards Colin Link to comment Share on other sites More sharing options...
96RAF Posted September 23, 2015 Share Posted September 23, 2015 You may want to follow the thread 'Chipping an old DMU' in the DCC section Colin - similar story. Link to comment Share on other sites More sharing options...
RDS Posted September 23, 2015 Share Posted September 23, 2015 I would have them on the programming track at the same time, giving them the same id as you suggest. Link to comment Share on other sites More sharing options...
Graskie Posted September 23, 2015 Share Posted September 23, 2015 I agree with RDS, except that I see no real reason not to program one at a time if you don't have a long enough dedicated programming track to hold both at the same time, for instance. Having said that, any old long enough spare piece of track would do, so it shouldn't be a problem doing both at the same time, which would, of course, save the need for a second separate programming session. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.