anthony_cousins Posted December 14, 2015 Share Posted December 14, 2015 Im having trouble with my e-link. After about five to ten minutes of running the track looses power (The e-link light stays on). If I turn off the elink and wait a while and plug it back in it still wont work. Restarting Railmaster does nothing I have to turn off the pc and e-link wait five or so minutes then start it all again for it to work for another ten minutes then repeat the cycle again.Can anyone help please? Link to comment Share on other sites More sharing options...
Chrissaf Posted December 14, 2015 Share Posted December 14, 2015 Have you made the changes recommended by HRMS to your Railmaster.INI file to correct communication issues between RM and eLink..See this post, 5th reply down for details. Link to comment Share on other sites More sharing options...
anthony_cousins Posted December 14, 2015 Author Share Posted December 14, 2015 Have you made the changes recommended by HRMS to your Railmaster.INI file to correct communication issues between RM and eLink..See this post, 5th reply down for details.have you a link to this please? Link to comment Share on other sites More sharing options...
Fishmanoz Posted December 14, 2015 Share Posted December 14, 2015 Anthony, the red underlined "this post" is the link and for me it works. It is pointing to page 1 of the thread in the RM forum titled Hornby Railmaster and the HRMS post there in particular. And if I were you, I would make sure you have done everything detailed in the post, not just ensure you have the correct lines in your ini file. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.