breadboard Posted January 7, 2016 Share Posted January 7, 2016 I have just purchased a class 47 with TTS all appears well except that I can only get F 1 to 8. I cant seem to get any further. I am using a "select" controller. What can be done to get the other F numbers. Link to comment Share on other sites More sharing options...
Yelrow Posted January 7, 2016 Share Posted January 7, 2016 hi, what is firmware up to on your select. How old is it,what numbers come up when you first turn it on john Link to comment Share on other sites More sharing options...
37lover Posted January 7, 2016 Share Posted January 7, 2016 I don't believe you can with the Select, it's only a basic controller. I'm sure other members will be along shortly to confirm and make suggestions. Link to comment Share on other sites More sharing options...
Chrissaf Posted January 7, 2016 Share Posted January 7, 2016 To get F9 to F28 you need Firmware version 1.5 on the Select..This is confirmed on page 17 of the Select Version 1.5 user manual downloadable from here. Only Hornby can do the firmware upgrade on a Select for which there is a charge. Contact Hornby Customer Services by phone to arrange. Link to comment Share on other sites More sharing options...
37lover Posted January 7, 2016 Share Posted January 7, 2016 Chrissaf,Thanks for correcting my error. My Select is very dated and as I use Elite with RM I'm not about to get it upgraded. Link to comment Share on other sites More sharing options...
Chrissaf Posted January 7, 2016 Share Posted January 7, 2016 37, I wouldn't consider it an error.......its not an error if you haven't got or even seen 1.5 firmware. Even 1.4 firmware only supports F0-F8, so the change in Function support is relatively recent. AFAIK, firmware 1.5 was released around Summer 2015. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.