Convert Old Hornby R077 0-4-0 to DCC

[Peter1707819510]

I have an old R077 0-4-0 Loco that i want to convert to DCC. Looking at the Hornby advice sheet for a standard 0-4-0 shows there are 3 capacitors mine has only 1. Will it work alright on DCC with only the 1 capacitor.

Peter

[96RAF]

Take it out completely  Pete and just use the Hornby 0-4-0 DCC conversion as a guide.

the DCC decoder has all the tv/radio suppression necessary.

all you need is the wheel pickups diverted to the decoder red and black wires and the motor terminals attached to the decoder orange and grey wires.

[Peter1707819510]

Take it out completely  Pete and just use the Hornby 0-4-0 DCC conversion as a guide.

the DCC decoder has all the tv/radio suppression necessary.

all you need is the wheel pickups diverted to the decoder red and black wires and the motor terminals attached to the decoder orange and grey wires.

 

[Fishmanoz]

Peebo, by clicking Quote then Reply, all you are doing is repeating RAF's post and wasting space.  Reply by using the big box at the bottom of the page and clicking the green Reply button.  This is what I just did, so no useless repeat of others' posts.