papamilks Posted July 26, 2016 Share Posted July 26, 2016 I have just purchased a new select controller and when connected to my track the loco just starts running and the select unit doesn't operate any controls Is my new unit faulty or have i missed something in set up (All wiring and power connected as per manual and checked) Link to comment Share on other sites More sharing options...
poliss Posted July 26, 2016 Share Posted July 26, 2016 Is the loco is DCC fitted and not DCC Ready?DCC Ready means it does not have a decoder inside. Link to comment Share on other sites More sharing options...
papamilks Posted July 26, 2016 Author Share Posted July 26, 2016 Sorry user error I had the wires in the 15v take off must buy a new pair of specs Link to comment Share on other sites More sharing options...
poliss Posted July 26, 2016 Share Posted July 26, 2016 Easy mistake to make. We've all done something similar. 😆 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.