keith_whiteley Posted September 29, 2016 Share Posted September 29, 2016 Hi I have a Schools Class DCC fitted train (Motor in Engine, Decoder in Tender) and basically the motor/gears has/have jammed and I need to get into it.I have looked at the Service Sheet, but can't see an obvious way of removing the body of the Loco in order to get at motor, gears and so on. From close inspection, it looks as if this should be possible without taking off the "lower bits" (coupling rods, etc).Has anyone any ideas about how to do it?I don't want to go prising at things, because the whole plastic setup looks rather delicate.Many Thanks Link to comment Share on other sites More sharing options...
Howbi Posted September 29, 2016 Share Posted September 29, 2016 Keith........here's the relevant part of the instructions sheet.........HB/media/tinymce_upload/eff37aa99560339256ce237027da52b7.JPG Link to comment Share on other sites More sharing options...
keith_whiteley Posted September 29, 2016 Author Share Posted September 29, 2016 Great, thanks!Forgotten about "read the instructions"! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.