P3OrionTech Posted December 5, 2011 Share Posted December 5, 2011 Living in Australia and have the Venice Simplon R1073 Set. Set is still under Warranty. Set was last run on the layout about six months ago. Tried today - nothing. Re-set the box as per manual - no good. When I tried programming as per the manual again, still nothing. The manual states that the red light should flash up to seven (7) times. If it flashes eight (8) times then to reprogramme. This was done a few times but still nothing. As an aside, I have a small radio set nearby (3 metres away) and if I move the rotary knob I can hear some faint crackling on the radio. Getting a Mixed Freight Set for Xmas which has another Select Box. Any suggestions. Link to comment Share on other sites More sharing options...
Flashbang Posted December 5, 2011 Share Posted December 5, 2011 HiUsual suspects first....Thoroughly clean the rail tops.Ensure the locos pick-up wheel treads are clean too.Then retry programming it. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.