Forum-1211528 Posted November 30, 2016 Share Posted November 30, 2016 /media/tinymce_upload/881f8a59432d2a1522c33767ea664448.jpg/media/tinymce_upload/f39bde110b58abe68a227be86b41c558.jpgI am tempted with this the R357 class 31 with TTS sound as they do a class 31 sound chip and theres plenty of room in the loco for the speaker to go in the loco but the main problem here is the XO4 MOTOR do you think this could be done and would work?? Link to comment Share on other sites More sharing options...
96RAF Posted December 1, 2016 Share Posted December 1, 2016 You would have to find out the XO4 stall current Colin and compare with the TTS spec. TTS is virtually R8249 decoder based so if it will run reliably on one of those then the TTS should run it. Thats something you could try whilst waiting for the TTS decoders coming. Link to comment Share on other sites More sharing options...
pidder Posted December 1, 2016 Share Posted December 1, 2016 Can I ask, are the TTS decoders plug-in or hard-wired? Link to comment Share on other sites More sharing options...
96RAF Posted December 1, 2016 Share Posted December 1, 2016 TTS decoders are the standard 8 pin plug type on a harness. Link to comment Share on other sites More sharing options...
Chrissaf Posted December 1, 2016 Share Posted December 1, 2016 Pidder, the TTS decoder showing wiring and connectors has been posted as a photograph in this previous post..https://www.hornby.com/uk-en/forum/post/view/topic_id/14912/?p=8.In answer to your question, the TTS comes pre-terminated on a NEM 652 8 pin connector..EDIT: RAF got in whilst I was typing. Left my post in place as written because the photo link was included. Link to comment Share on other sites More sharing options...
pidder Posted December 1, 2016 Share Posted December 1, 2016 Thanks both, useful info... Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.