Dringblack Posted May 5, 2017 Share Posted May 5, 2017 Running Elite, everything Ok.however just put Bachman chip in Bachman Tornado. As soon as I place on main tracks, system shuts down and shows error. I've checked for obvious shorts. Any help? Link to comment Share on other sites More sharing options...
Chrissaf Posted May 5, 2017 Share Posted May 5, 2017 I've checked for obvious shorts..What with......a meter or your 'Mark 1' eyeballs?.Also, being a Bachmann, is it a 21 pin socket or a 'hard wired' decoder you have fitted. I'm more than willing to be proven wrong, but either the decoder is faulty or is mis-wired / mis-fitted. As obviously the controller is detecting a high current draw that it is deciding is a 'short'. Link to comment Share on other sites More sharing options...
Dringblack Posted May 5, 2017 Author Share Posted May 5, 2017 I've checked for obvious shorts..What with......a meter or your 'Mark 1' eyeballs?.Also, being a Bachmann, is it a 21 pin socket or a 'hard wired' decoder you have fitted. I'm more than willing to be proven wrong, but either the decoder is faulty or is mis-wired / mis-fitted. As obviously the controller is detecting a high current draw that it is deciding is a 'short'. Link to comment Share on other sites More sharing options...
2e0dtoeric Posted May 5, 2017 Share Posted May 5, 2017 Dringback - you didn't put any words into your reply to Chrissaf.Please do not use the blue button, that merely repeats the last post!Scroll down to the empty box below the title and line of icons, and type your words there, then reply with the GREEN button with the word reply in it! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.