Disco Posted January 4, 2012 Share Posted January 4, 2012 Hi I need to unpin the track (oval, plus two sidings). What is the best way of doing this. Reason for unpinning is so we can align extension pack C as when we try to connect a section of track to the exisiting layout, it seems to be a 1/4 of and inch out, and therefore won't fit together.Its when we've pinned it down last week, we haven't got it in the correct place - not far off, but in cases like this, you obviously need to be spot on.Current layout is Oval, Track Pack A,B and F, and also C which we're just about it add Link to comment Share on other sites More sharing options...
Disco Posted January 4, 2012 Author Share Posted January 4, 2012 sorted now!pair of sissors do the trick ;-) although guessing that not really the safe way! Link to comment Share on other sites More sharing options...
Disco Posted January 4, 2012 Author Share Posted January 4, 2012 Post a new reply... Link to comment Share on other sites More sharing options...
cruiser Posted January 4, 2012 Share Posted January 4, 2012 [reply]Disco said:i use a small pair of wire cutters for that task seem to be just the right shape but make sure there is no power to the track just in case it shorts Link to comment Share on other sites More sharing options...
Disco Posted January 5, 2012 Author Share Posted January 5, 2012 oh yea, all the power was off when I did it Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.