locoman44422 Posted January 6, 2012 Share Posted January 6, 2012 Hi all, I have recently purchased Hornby R2899XS (EWS Class 60 'The Hundred of Hoo'), in which the acceleration and deceleration rates have changed without my input. Further to this all of the sound functions work except the brake squeal when stopping. They were all working fine, then it would seem the settings have changed. I haven't edited the settings, and can't restore the CV's as I only have the Select Controller. If anybody could help it would be much appreciated. Stu Link to comment Share on other sites More sharing options...
stevecamden Posted January 7, 2012 Share Posted January 7, 2012 Try re-setting the Select controller. If this doesn't work then you will need to find a friend to reset the loco decoder.Steve Link to comment Share on other sites More sharing options...
cruiser Posted January 14, 2012 Share Posted January 14, 2012 hi am having problems with a sound chip too sometimes just makes a click or else works for a few seconds then stops a bit then works again anyone any ideas ? have reprogrammed loco a few times to see if that would help but its always same Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.