alan3rail Posted January 18, 2018 Share Posted January 18, 2018 Hi, I’m in the process of converting my HD 3-rail layout to DCC. I will be using Hornby R8249 decoders and the Elite controller with Railmaster. I would greatly appreciate any input from members who have experience of running HD 3-rail with DCC. Link to comment Share on other sites More sharing options...
Chrissaf Posted January 18, 2018 Share Posted January 18, 2018 This same question was asked four days ago.....see this other thread:https://www.hornby.com/uk-en/forum/hd-3-rail-to-dcc-21637/?p=1 Link to comment Share on other sites More sharing options...
alan3rail Posted January 18, 2018 Author Share Posted January 18, 2018 No,it's not the same quaation, Question 1 was regarding the feasibiilty and question 2 was for input from members that have actually done it, Link to comment Share on other sites More sharing options...
Chrissaf Posted January 18, 2018 Share Posted January 18, 2018 The other post did include reply comments by members who had done it themselves and therefore have such experience as you asked for above. Therefore it was perfectly valid to bring the other post to the attention of this questions poster..But I now see that you have changed your 'username' and you are infact the same poster under a different name. My original reply above was written on the assumption that this was a similar question by a completely different forum member. Had this post had your other "retroman" user name against it, then I obviously would not have provided the reply above in the first place. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.