Retrojim Posted January 28, 2012 Share Posted January 28, 2012 Just set up my new DC controller and Im sure Im doing something wrong, I cant seem to add a new loco with a new address, it says in the instruction manual that I have to press and hold the select button for two seconds and apparently LA will flash, well it doesnt no matter how many times I try! Has anyone got any advice or do I have a faulty controller? Link to comment Share on other sites More sharing options...
Rog RJ Posted January 28, 2012 Share Posted January 28, 2012 Have you tried holding it down for a little bit longer?Newer versions of the Select have updated firmware that says the select button should be held down for 3 seconds.See this thread https://www.hornby.com/forums/hornby-forums/hornby-digital/2121/ Link to comment Share on other sites More sharing options...
Retrojim Posted January 28, 2012 Author Share Posted January 28, 2012 Yeah I have tried for over ten seconds but still nothing... Link to comment Share on other sites More sharing options...
Rog RJ Posted January 28, 2012 Share Posted January 28, 2012 Retrojim said:Yeah I have tried for over ten seconds but still nothing...In that case I would try resetting the Select. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.