Kerrie72 Posted January 18, 2019 Share Posted January 18, 2019 II have recent brought a train and in the shop all the lights worked. But when I finally set my n gauge up, the lights don't work...any ideas please Link to comment Share on other sites More sharing options...
Chrissaf Posted January 18, 2019 Share Posted January 18, 2019 What lights? [you used the term "Train". A train is the loco and what it is hauling behind it, so lights could possibly mean carriage lights]..Coach carriage lights?orLoco directional lights (white front / red rear)?.Is this DC Analogue or Digital DCC control.........this makes a difference to the possible answers. I know that you have placed this post in the Hornby DCC section, but people do sometimes mis-post in the wrong forums and it is not wise to make assumptions..If it is the loco white and red directional lights and you are using DCC control....have you sent a function F0 command from your DCC controller to turn the lights 'on'?.TIP: As this is your first post, just be aware that the 'Blue Button with the White Arrow' is not a 'Reply to this post' button. If you want to reply, scroll down and write your reply in the reply text box at the bottom of the page and click the Green 'Reply' button. Link to comment Share on other sites More sharing options...
Rog RJ Posted January 18, 2019 Share Posted January 18, 2019 Also, what controller are you using? On some controllers F10 is used to switch directional lights on and off, and some systems have a dedicated button that needs to be used. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.