JPaindaveine Posted April 16, 2019 Share Posted April 16, 2019 Hi. Brand new Arc Pro Platinum GT Racing installed three days ago. Everything ok until this morning, lane B is not working anymore. All cars are ok on lane A (close to powerbase) but none on lane B. Nor with app running, nor without app running.Lane changer are ok, but when on lane B, cars stop.I isolated track piece with powerbase, same issue: all is ok on lane A, nothing on lane B. If I swap the two power units, lane A still ok, lane B still KO.What can i do ? Thanks for any help. Link to comment Share on other sites More sharing options...
Dr_C Posted April 16, 2019 Share Posted April 16, 2019 Hi JPaindaveine, I think this is one for Scalextric customer care... it sounds like an internal fault inside the powerbase and better to ask Scalextric to fix/replace (assuming it is under warranty ). By the way, what happens in analog mode? Is the A lane ok and the B lane dead i.e. similar to digital? The fact that one lane functions in digital mode suggests all four electronic output transistors on the main circuit board of the powerbase are fine - hence likely it is a detached internal wire. That said, best route would be to ask Scalextric customer care for assistance... Hope this helps, C Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.