Flying scot60 Posted February 17, 2020 Share Posted February 17, 2020 Can DCC fitted train run on an analogue system? Link to comment Share on other sites More sharing options...
Howbi Posted February 17, 2020 Share Posted February 17, 2020 Yes, as long as the option for DC running is 'on' in the decoder's CV 29.......Try the loco first and if it runs then all is ok but if not come back to us if you need further help re: changing CV29 because you will need to use somebodys DCC controller or remove the decoder and fit a blanking plug....HB Link to comment Share on other sites More sharing options...
ColinB Posted February 22, 2020 Share Posted February 22, 2020 Make sure it is a modern controller with decent smothing. I ran one of my DCC chipped locos with an old H & M controller and it fried it. With my newer one with smoothed outputs it is ok. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now