Chrissaf Posted February 24, 2020 Share Posted February 24, 2020 That's because it is only compatible with Windows. I'm not sure it will even work if you have Bootcamp or Parallels installed on the Mac. R- Link to comment Share on other sites More sharing options...
Chrissaf Posted February 24, 2020 Share Posted February 24, 2020 Please can you tell me if I can download the latest update to my Mac and if it will update my elete from it.Everything I've seen talk about Windows.Thank you Link to comment Share on other sites More sharing options...
Bulleidboy Posted February 25, 2020 Share Posted February 25, 2020 Hi Mickey - if you are not able to do it yourself, and can't find a friend with Windows, Hornby will do it, but it will cost £20 (inc. P&P). I phoned Hornby and got a "job number", then posted my Elite on a Tueday afternoon - it was back with me Friday morning. This of course is the last resort, if you are not able to do it yourself. BB Link to comment Share on other sites More sharing options...
Flashbang Posted February 25, 2020 Share Posted February 25, 2020 In theory an Apple Mac running Parallels should be ok, as Parallels has to have a full Windows OS installed so the Parallels partition is in fact a sort of Windows PC running on MAC processor. Link to comment Share on other sites More sharing options...
ColinB Posted February 26, 2020 Share Posted February 26, 2020 Just a word of warning. I used this app to update my Elite, it relies a lot on the computers speed, although there is a menu item (listbox in "windows" speak) to set it. Trouble is, it erases the memory then attempts to reprogram the Elite. In my case I didn't realise that you had to set the speed in the listbox, so basically I now had a brick as it had erased the memory. Once I realised I needed to set the speed/delay it worked OK. The thing that concerns me, is whether with the MAC, even if you get the USB comms to work, would you be able to set the speed/delay to be slow enough. Link to comment Share on other sites More sharing options...
96RAF Posted February 26, 2020 Share Posted February 26, 2020 The installer ‘speeds’ are set to cater for the XP generation of chipsets up to Intel i7 equivalent chipsets, so it should be able to cope with a Mac running a Windows emulator. Many folk have asked what happens if I mess up the update and end up with a ‘brick’ - well you just go back to square one and try the install again. It works eventually unless the Elite has some latent damage causing it to fail completely, which has only been reported by two folk over the many years of updates. Link to comment Share on other sites More sharing options...
Fishmanoz Posted February 26, 2020 Share Posted February 26, 2020 Colin, I'm surprised you haven't been around long enough to have seen one of the 27 million (I never exaggerate) references to Chris's detailed instructions on using the update app incl speed setting strategy, also often referenced by Rob who did the research on that strategy. But no matter, you figured it yourself. And would seem that if you have the app running under an emulator, access to speed setting shouldn't be a problem as it is internal to the app. Can't imagine it only half running. Link to comment Share on other sites More sharing options...
Chrissaf Posted February 26, 2020 Share Posted February 26, 2020 Fishy,Re-inventing the wheel rarely ends up with a new wheel design..... Link to comment Share on other sites More sharing options...
ColinB Posted February 27, 2020 Share Posted February 27, 2020 Actually, I suppose I was a bit stupid, I just assumed it would be in the instructions on the website or in the help menu on the application. I have covered this in an earlier post, having just updated a Fleishmann controller I just assumed it would be the roughly the same. I used to write applications to reprogram automotive modules in Dealerships, so I just assumed it would be the same (the "on screen instructions" tell you what to do). It is really easy when writing a "windows" app. Link to comment Share on other sites More sharing options...
Fishmanoz Posted February 27, 2020 Share Posted February 27, 2020 Certainly would have been no problem if Chris had been writing the documentation for them! Just a minute, he is, just have to search the forums to find it. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now