Losing patience Posted April 7, 2020 Share Posted April 7, 2020 hi I have built a new layout and all my hornby steam trains refuse to do a full circuit , I have 2 class 37s and a class 66 not hornby they go round perfect, my steam train problem is stop start then come to a curve and the front bogies on the mallard just do not turn and derails the train, it’s a brand new train , don’t know why my flying Scotsman does exactly the same comes to a curbe straight on and you guessed it derailed, my virgin pen tool goes round half way and then comes to a stop and the driving wheels are spinning, more problems than I can cope with. Now my central dmug sometimes works you can hear the motor trying to work l a humming sound as though it’s got a jammed motor, has anyone got some clues, if not they are going in the bin Link to comment Share on other sites More sharing options...
Chrissaf Posted April 7, 2020 Share Posted April 7, 2020 ....if not they are going in the bin..Are your curves 'by chance', 'Radius 1' curves......these would be Hornby R604 & R605?.If they are, then I will come round and hold up the bin lid for you, so that you can put your 'Radius 1' track bits in it, instead of the locos. Modern Hornby locos, particularly steam configuration types don't like Radius 1 curves. It normally states on the loco packaging 'Radius 2' minimum..PS - May I suggest you go into your 'Community Account' and change your 'nickname' from "Losing patience" to something that will have longer lasting usability. If you don't change your 'nickname' now, every post you raise or reply to 'forever and a day' will be shown against this 'Losing patience' display name..Just out of curiosity what is a "virgin pen tool"? Do you mean a "Pendolino"?And a "central dmug" has me completely stumped..TIP: As a newbie poster on the forum, just be aware that the 'Blue Button with the White Arrow' is not a 'Reply to this post' button. If you want to reply to any of the posts, scroll down and write your reply in the reply text box at the bottom of the page and click the Green 'Reply' button..See also – further TIPs on how to get the best user experience from this forum.https://www.hornby.com/uk-en/forum/tips-on-using-the-forum/. Link to comment Share on other sites More sharing options...
96RAF Posted April 7, 2020 Share Posted April 7, 2020 You may want to check that your track is dead flat especially where the straight enters the corner and that the track is joined correctly and there is bot a step due to a misconnected rail joiner. Link to comment Share on other sites More sharing options...
jane1707819582 Posted April 7, 2020 Share Posted April 7, 2020 Just out of curiosity what is a bot a step ? Link to comment Share on other sites More sharing options...
37lover Posted April 7, 2020 Share Posted April 7, 2020 jane2Take a look at your keyboard and note what letter is next to "b"! Link to comment Share on other sites More sharing options...
96RAF Posted April 7, 2020 Share Posted April 7, 2020 Typing on an iPad with sausages for fingers. Not not bot. I often type tou instead of you for the same reason, which is the same word just a different langauge. Link to comment Share on other sites More sharing options...
Going Spare Posted April 7, 2020 Share Posted April 7, 2020 I suspect the "central dmug" may in fact be a Central Trains class 170 dmu from Bachmann, another train with long coaches in difficulty trying to negotiate tight curves. Link to comment Share on other sites More sharing options...
jane1707819582 Posted April 8, 2020 Share Posted April 8, 2020 jane2Take a look at your keyboard and note what letter is next to "b"!V !!!And whoosh !! Link to comment Share on other sites More sharing options...
96RAF Posted April 8, 2020 Share Posted April 8, 2020 There’s one in ebery billage. Link to comment Share on other sites More sharing options...
jane1707819582 Posted April 8, 2020 Share Posted April 8, 2020 There’s one in ebery billage.You seem to have missed the point . Link to comment Share on other sites More sharing options...
37lover Posted April 8, 2020 Share Posted April 8, 2020 There’s one in ebery billage.You seem to have missed the point .Twice in this example? 😇 Link to comment Share on other sites More sharing options...
96RAF Posted April 8, 2020 Share Posted April 8, 2020 Ovbiously too deep for you guys.Just as well I can’t misspell 4-6-2. Getting us back on topic. Link to comment Share on other sites More sharing options...
ColinB Posted April 8, 2020 Share Posted April 8, 2020 Yes, what is it with posts, you write them and read them, but once you have posted them you suddenly see all the errors. At least this site gives you the option to edit, yahoo doesn't. The other thing that seems to happen is you type faster than the webpage can update so it misses the odd character, but then you have the "texters" that are so used to texting that proper english has no meaning, like 4 means "for" rather than "four". When you have a full page of it, it is impossible to read. As for the original post, I agree too tight a bend, I hate to say it, but looking at the locos wheels and the bend that should be obvious. On steam locos when the motor hums it normally indicates either the valve gear is stuck or the intermediate gear in the loco has issue. Link to comment Share on other sites More sharing options...
Sultan Posted April 8, 2020 Share Posted April 8, 2020 @462steamtrainNot wanting to appear stupiod by asking a daft question but is your central dmu fitted with a dcc loco decoder. If it isn't the dc motor is receiving an AC supply and will hum and not move much. If you conctnue to feed AC power into a dc motor it will burn out. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now