stephen_o Posted April 28, 2020 Share Posted April 28, 2020 Hi, I am just starting to look at putting together the menagerie of items acquired for my new layout. I have bought R900 and R902 transformer/controllers with the intention that I could wire my points, signals and isolating sections using the hornby switches that clip/attach to the top of the controller for tidyness. Which switches are for which purposes and just for info is there one common feed through the bank of switches or does each individual switch need its own supplu wire into a junction block or similar. Thanks in advance. there will I am sure be more questions as things progress. Stephen Link to comment Share on other sites More sharing options...
Tony57 Posted April 28, 2020 Share Posted April 28, 2020 R044 Black for point switching and semaphor sinals (R633 point motors)R047 Green for Isolating tracks R046 Yellow for Green and Red light signal All an be connected together into t block. Link to comment Share on other sites More sharing options...
Chrissaf Posted April 28, 2020 Share Posted April 28, 2020 TIP: As a newbie poster on the forum, just be aware that the 'Blue Button with the White Arrow' is not a 'Reply to this post' button. If you want to reply to any of the posts, scroll down and write your reply in the reply text box at the bottom of the page and click the Green 'Reply' button..See also – further TIPs on how to get the best user experience from this forum.https://www.hornby.com/uk-en/forum/tips-on-using-the-forum/. Link to comment Share on other sites More sharing options...
stephen_o Posted April 28, 2020 Author Share Posted April 28, 2020 Thats Great information, thank you very muchStephen Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now