Chris MD Posted May 18, 2020 Share Posted May 18, 2020 Have the Arc pro and really enjoyed racing with it. Successfulply installed the 7005 chips on two of my analog cars.. they work great, can calibrate, change lanes etc. But they don't register laps. Is there anything I can do here? Link to comment Share on other sites More sharing options...
gorp Posted May 18, 2020 Share Posted May 18, 2020 Unless you have the updated version (24hr lemans and some sunset speedway sets) , you cannot be pushing lane change button down when crossing power base so no changer in front of it. You need minimum 1/2 to full straight after turns before powerbase. If your other digital cars count laps, suggest problem is need to clean lens of car eye and reposition its depth. Do know there is also an issue with distance between guide and eye.Believe it was not known when 7005 instructins came out. Found latest answer on issue here.topic : Fly on scaly on this page , answer by Andyit gives distance max for guide to eye and need for black guide only (very old requirement ) Check help and advice at top here and slotracer.online and slot forum, digital, scaly, arc pro. . Link to comment Share on other sites More sharing options...
Andy P. Posted May 18, 2020 Share Posted May 18, 2020 The guide blades must be black for the laps to reigster as well... Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now