Crompton Posted July 22, 2020 Share Posted July 22, 2020 Is it possible to run 3 or 4 locos of the same class with the Hornby Elite using the Double header setting, someone has told me I can but is this true? Link to comment Share on other sites More sharing options...
Chrissaf Posted July 22, 2020 Share Posted July 22, 2020 Whilst you wait for a reply, perhaps you would spend a few minutes reviewing the TIPs in the TIP page link below:.TIP: As a newbie poster on the forum, just be aware that the 'Blue Button with the White Arrow' is not a 'Reply to this post' button. If you want to reply to any of the posts, scroll down and write your reply in the reply text box at the bottom of the page and click the Green 'Reply' button..See also – further TIPs on how to get the best user experience from this forum.https://www.hornby.com/uk-en/forum/tips-on-using-the-forum/. Link to comment Share on other sites More sharing options...
96RAF Posted July 23, 2020 Share Posted July 23, 2020 Read pages 23/24 of the Elite manual which suggests 2 is the consist limit.The Select can run 2 or 3 locos in a consist - see pages 14/15 of that manual. Link to comment Share on other sites More sharing options...
2e0dtoeric Posted July 23, 2020 Share Posted July 23, 2020 You can, of course, give the four loco's the same 'address' code, but speed-matching could be a problem. Link to comment Share on other sites More sharing options...
96RAF Posted July 23, 2020 Share Posted July 23, 2020 You can, of course, give the four loco's the same 'address' code, but speed-matching could be a problem. That seems to be what the Select is doing Eric. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now