Potrail2378 Posted July 26, 2020 Share Posted July 26, 2020 Hi, I have a Hornby mixed freight set (I believe it's a R1236) with two locomotives and the select controller. I have added lots of track, points, locos, etc, and it is on a layout up in the loft. Recently, with the instruction book in my hand, I tried to 'consist' the two locos using #10 to control them, this worked fine. Then I tried to 'consist' a Flying Scotsman railroad and a Mallard railroad on #11 on the select unit. Nothing happened! Now all my locos have 'lost' their codes and the select controller's led flashes when I put any load on it. However, the sound units on Mallard and FS seem to still be working.Is there anything I can do at home to fix the flashing led screen? Thanks in advance Link to comment Share on other sites More sharing options...
Chrissaf Posted July 26, 2020 Share Posted July 26, 2020 Subject to the firmware version of the Select, find the section in the manual regarding how to 'Factory Reset' the Select and follow it. Link to comment Share on other sites More sharing options...
Potrail2378 Posted July 27, 2020 Author Share Posted July 27, 2020 Hi, thanks for the reply. I did a factory reset and it works fine now Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now