Eospro Posted April 23, 2012 Share Posted April 23, 2012 According to my select manual to change the direction setting for a particular loco it states press and hold the unlit direction key , The LED will then display either Fd or rd for one second.Nothing happens. I have tried several times even holding the unlit direction key for upto 30 seconds. My select unit also has the updated firmware compared to the version listed in the manual and the lastest one downloaded from Hornby. I have tried a reset and this does not help either. I'm wondering if there is now a different way to change directions with the new firmware.Any help would br great.Cheers Link to comment Share on other sites More sharing options...
Rog RJ Posted April 23, 2012 Share Posted April 23, 2012 There is a new method of changing the default direction. See this https://www.hornby.com/forums/hornby-forums/hornby-digital/2121/?page=1#post20659 Link to comment Share on other sites More sharing options...
Eospro Posted April 24, 2012 Author Share Posted April 24, 2012 Thank You Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.