Chrissaf Posted August 17, 2020 Share Posted August 17, 2020 Good morningPlease can anyone offer some advise on why my hornby class 31 has a stop and start problemSince fitting a TTS Class 31 sound decoder the loco will run for around 15-20 seconds the comes to a stop and start on its own.Not sure if there is a CV value that I have altered whilst setting up the decoder.any help gratefully recievedRoger RN Link to comment Share on other sites More sharing options...
ColinB Posted August 17, 2020 Share Posted August 17, 2020 It might be that there is an issue with the way your locos is picking up its power. TTS decoders are very "twitchy" about power or lack of it, which means they stop when they intermittantly don't receive power. Then as the loco rests on the track it suddenly finds power again and starts up again. So where your loco was working ok on DC it may well stumble on a TTS decoder. TTS decoders seem to worse at this than normal decoders. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now