dBerriff Posted January 12, 2023 Share Posted January 12, 2023 Series 2, Episode 1 can now be streamed from UK TV Play, as can a ‘special’ flagged up as Episode 11 2 11 (Hornby says so). Announced on FaceBook. Link to comment Share on other sites More sharing options...
Deem Posted January 12, 2023 Share Posted January 12, 2023 UpdateYesterday channel is showing, older series 1 episode 1 on now at 2100.However I can watch Series 2 Episode 1 on uktvplay website or using uktvplay app on Apple TV by registering to UKtvplay.I am watching it now.Regards Link to comment Share on other sites More sharing options...
Deem Posted January 12, 2023 Share Posted January 12, 2023 Another episode is available to watch, called;Hornby: A Model WorldTop Ten ModelsSeries 2, Episode 11 Link to comment Share on other sites More sharing options...
ntpntpntp Posted January 12, 2023 Share Posted January 12, 2023 I enjoyed watching the new series 1st episode and the top 10 special episode. Link to comment Share on other sites More sharing options...
Deem Posted January 13, 2023 Share Posted January 13, 2023 I don't know if anyone else notice this or not, when I watch last night it didn't accoured to me neither, but I was waiting to for something else and I thought of watching it again. Towards the end of the show I noticeA Flying Scotsman TT:120 showing going around the bend but wheels aren't moving.Please watch small video clip I recorded on phone to show. I hope I am not breaching any broadcasting laws neither don't want to get into trouble.https://drive.google.com/file/d/108qwiXps9mwN-S7hLqLvIcgaqIgVbWvK/view?usp=drivesdk Link to comment Share on other sites More sharing options...
Dave the Busker Posted January 13, 2023 Share Posted January 13, 2023 Good spot on the non-moving wheels. I'm guessing an early prototype for the bodyshell before the wheels were finalised, something like that? I've not watched the whole programme yet, I'll keep an eye out for that when I'm watching later Link to comment Share on other sites More sharing options...
DarkRedCape Posted January 13, 2023 Share Posted January 13, 2023 It’s probably a Peckett under there just to show off the bodyshell. laughing Link to comment Share on other sites More sharing options...
Engine shed 1 Posted January 13, 2023 Author Share Posted January 13, 2023 It's been announced that the first ep will now be shown on yesterday on Mon the 16th Jan at 8pm however like other people have posted it is available on uktvplay now Link to comment Share on other sites More sharing options...
Bulleidboy Posted January 13, 2023 Share Posted January 13, 2023 I have now watched both Episodes of Series 2. I think someone typed in a Roman II instead of 2 - I do not think it was episode 11 - and there are twelve in Series 2 - but where are these announcements coming from? I have just looked at the Yesterday channel (155 on SKY) for Monday 16th January 2023 at 8pm. and it quite clearly says "Series Two - Episode 2" - which it should be as Episode 1 should have been shown last Monday 9th January 2023. Now I have watched both Episodes, I think it looks like it will be a good series. Link to comment Share on other sites More sharing options...
Engine shed 1 Posted January 13, 2023 Author Share Posted January 13, 2023 It's on the yesterday twitter account and also on the sky guide for Mon it say s2 ep1 Link to comment Share on other sites More sharing options...
Deem Posted January 16, 2023 Share Posted January 16, 2023 Link to comment Share on other sites More sharing options...
Deem Posted January 16, 2023 Share Posted January 16, 2023 At last, series 2 episode 1 have started on Yesterday sky channel 155 at 2000. If you haven't seen it already.Regards Link to comment Share on other sites More sharing options...
LesXRN Posted January 16, 2023 Share Posted January 16, 2023 Well, I just watched the show and as much as I found it interesting, there were two glowing errors. The first was the quartering on the Jinty in the diorama, absolutely not correct in relation to the exhaust beat.The second was the tender driven Scotsman going along with the loco wheels locked up and not rotating. What an utter shambles and a disgrace to show these errors to our serious enthusiasts, me included.Hornby, hang your heads in shame!!! And that includes the program producer. Link to comment Share on other sites More sharing options...
ntpntpntp Posted January 16, 2023 Share Posted January 16, 2023 I watched the episode again (previously viewed on the player). I know it's been commented on already, but those stuck and sliding Scotsman wheels on the shots at the end really do stand out. I'm very surprised those shots were used in the program, there's no excuse. Link to comment Share on other sites More sharing options...
ColinB Posted January 16, 2023 Share Posted January 16, 2023 I did wonder why the loco was sliding along, Hornby stopped making tender driver locos years ago, so where did they find that one. That was the thing I hated about tender driven locos and it took a lot of effort to fix the issue once it started to occur. The thing that did surprise me was Simon showing off his new TT Flying Scotsman to the National Railway Museum with the wheel weights in the wrong place. Did nobody not notice until they started making them? Link to comment Share on other sites More sharing options...
dBerriff Posted January 17, 2023 Share Posted January 17, 2023 Clearly not and it must have cost them quite a bit. I know only too well how easy it is to get fixated on certain aspects of a design - in this case the loco body fidelity - and to miss other errors. This is why a quality assurance process needs set procedures and check lists. I would hope Hornby have added another box to tick. Link to comment Share on other sites More sharing options...
Bulleidboy Posted January 17, 2023 Share Posted January 17, 2023 The locked wheel Flying Scotsman was probably the one that SK dug out of his loft - where it had been for twenty years. The FS being presented at the NRM was almost certainly a pre-production model. The guy repairing Rocket got his wires around the wrong way - the loco went backwards when it should have been going forwards - that's life, we have all done it. This website gets more like RMWeb everyday - if it moves criticize it! Link to comment Share on other sites More sharing options...
ColinB Posted January 17, 2023 Share Posted January 17, 2023 @Bulliedboy the Flying Scotsman was pre production as we all know as it wasn't painted. We also know from the web just before they released it that the wheel weights were it the wrong position even at that late stage. I was just surprised that when Simon was showing it off he didn't notice, I just assumed they messed up the wheels between pre production and production. I must admit I never realised they were opposite to the con rod position but when you think about it, it is obvious. There is also the point that I don't design model trains. I suspect the wires being round the wrong way was done for the cameras as is a lot of it. If Pete Waterman is correct about 3 D printing those buildings will warp in a couple of years time. Constructive criticism is useful, if you can't take criticism don't make anything. Link to comment Share on other sites More sharing options...
Deem Posted January 17, 2023 Share Posted January 17, 2023 I don't know if I am wrong or I am different to others, when I shared the video showing wheel sliding, I was not criticising Hornby or Production team, I was marely asking if there was a fault with Loco. I am firm believer that we all are human at the end of the day and error or fault or shortcoming are in our DNA, nobody is perfect. If anyone points to you any faults or mistake, maybe they are trying to help you instead of criticising you.Anyway that's just the way I am and I hope other learn from me as well. Link to comment Share on other sites More sharing options...
ntpntpntp Posted January 17, 2023 Share Posted January 17, 2023 Showing a faulty model being fettled and fixed is great, but showing a smart gold-plated-rod limited edition (expensive?) model stuck and sliding along the track doesn't do much for perceived brand quality nor for care and attention to the editing of the episode :( It's such a fundamental thing that you'd think someone would have "proof-watched" and noticed before signing off for transmission. Link to comment Share on other sites More sharing options...
Deem Posted January 17, 2023 Share Posted January 17, 2023 Showing a faulty model being fettled and fixed is great, but showing a smart gold-plated-rod limited edition (expensive?) model stuck and sliding along the track doesn't do much for perceived brand quality nor for care and attention to the editing of the episode :( It's such a fundamental thing that you'd think someone would have "proof-watched" and noticed before signing off for transmission. Fair point. Link to comment Share on other sites More sharing options...
ColinB Posted January 17, 2023 Share Posted January 17, 2023 To be honest when I saw it sliding along the track, I did wonder what they were doing, I never realised it was the original tender driven model. Surprising, really as I have spent ages trying to fix my old locos from doing the same. In the end I took the sensible solution and sold them to be replaced with the newer loco driven variety. Tender driven locos must be at least 30 years old. Link to comment Share on other sites More sharing options...
dBerriff Posted January 17, 2023 Share Posted January 17, 2023 Mine are 40 years old! I pulled a couple out of storage recently and they are not that difficult to keep running. I might feel differently if they were valuable limited editions of course and not want to risk damaging anything by stripping them down for a good clean.Service sheets are available online and it is usually a case of cleaning up the axles and bearings and using something like Peco’s Power Lube to help with conductivity.I would prefer loco-drive and all-wheel pickups but there is a certain satisfaction in keeping these heritage models running. The fact we are having this discussion at all is a reflection of their longevity and good support (service sheets). Link to comment Share on other sites More sharing options...
LTSR_NSE Posted January 17, 2023 Share Posted January 17, 2023 @ColinB - my tender drive Flying Scotsman & Evening Star are each only 25 yrs old. Don’t forget that Hornby continued producing tender drives for a few more years after moving production to China.I will never sell or replace them since what they commemorate is far more significant to me, than either increased detail or loco-drive realism could get close to. Link to comment Share on other sites More sharing options...
Going Spare Posted January 17, 2023 Share Posted January 17, 2023 Although loco-drive models were already being produced, a few tender-driven versions were released as late as 2010, possibly at attractive prices, principally for mail-order companies even though general releases stopped around 2004. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now