Body removal Hornby R 3257 2bil

[JsionyRN]

Could anyone tell me how to remove the body on the above hornby R3257 2 bil

Thank you.

[Going Spare]

If you study the Service Sheet, you will see that there are six clips holding the body to the underframe, one in each corner and one at the mid point along each side. You will need to carefully insert a thin blade (or perhaps even a fingernail) and then thin plastic strips between the bottom of the body sides and the underframe, working along one side gently levering the body outwards until the clips release.

[Bulleidboy]

You could also use this service sheet - it says it also covers later models. You can find it on this site under "Support"

HSS 393 2BIL

R3161; R3162; R3177

[ColinB]

I generally do mine by using old credit cards or loyalty cards, in some cases 4. I think if I remember the bil was one of the easier ones, sometimes on some models the clips get stuck with the driver window frames.