Aussie Fred Posted September 23, 2023 Share Posted September 23, 2023 Hurray, my Deltic "The Black Watch" is on it's way to me and I can"t rember what the story is with the sound fitted TXS. Am I still able to run it as a DCC, I am pretty sure I can. Link to comment Share on other sites More sharing options...
Pendragon Sailing Posted September 23, 2023 Share Posted September 23, 2023 Yes Aussie Fred, you can…..but firstlyDownload the HMDCC App to your chosen device (iphone, ipad, or Android)Link the TXS decoder to the App by following the instructions that will (probably) come with your loco, or by referring to the HMDCC user manual.Once you’re happy everything is working well using the Bluetooth connection, you can then switch the loco to DCC running (on your usual DCC controller) by clicking on the appropriate button on the “Locomotive Settings” screen (see photo).You can switch back to Bluetooth control by going back into the App and you’ll be given the option to do so.Enjoy! Link to comment Share on other sites More sharing options...
ColinB Posted September 23, 2023 Share Posted September 23, 2023 Yes you can, that is what I do with HM7000. Link to comment Share on other sites More sharing options...
ColinB Posted September 23, 2023 Share Posted September 23, 2023 Actually I hate to say it but he is using DCC and he already said it was fitted with sound which I assume Hornby has set to the right one. So he needs to do nothing, no logging onto anything with his smartphone. So unless I have missed something he doesn't need to do anything unless he wants to, it will run just like any other sound decoder, I know because that is exactly how I run mine. Link to comment Share on other sites More sharing options...
Aussie Fred Posted September 23, 2023 Author Share Posted September 23, 2023 Thanks Colin,yes, I am DCC, that is why I posted it in the DCC section. Can't wait to hear that "Deltic" sound on my layout. Link to comment Share on other sites More sharing options...
SteveM6 Posted September 23, 2023 Share Posted September 23, 2023 For once, everyone is right.Yes it should run on DCC straight out of the box and yes, it will have the correct sound profile.However, the sound file is almost certain to be version 1 of the profile which can exhibit a distorted horn as the default volume is too high. Don’t rush to run it as correcting the profile is straightforward.As Pendragon suggests, download the HMDCC app to your phone or tablet. Then follow the instuctions to link the decoder. When you do that you will have the opportunity to download the latest profile and adjust the volume level.Then, as has been said, if you want to run it as a ‘normal’ decoder, use the app to switch to DCC mode and use your existing controller as normal. Link to comment Share on other sites More sharing options...
Aussie Fred Posted September 24, 2023 Author Share Posted September 24, 2023 Just a little unsure now, If I do the app thingy and get it running on that, can I then control it from the app as well as control my other trains from my DCC controller. I thought I had to have a "dongle" or something else connected to the system to run HM7000. I guess I will have to study up on the HM7000 system - I am olde school and thought DCC was a big jump forward and still not got my head around that properly. Link to comment Share on other sites More sharing options...
Fishmanoz Posted September 24, 2023 Share Posted September 24, 2023 No dongle needed for HM7000-equipped locos Fred, only for running non-HM7000 through the app. No dongle needed at all if you wish to do all your programming and running with DCC. But …. if you want to take advantage of any updates or new profiles, you can only access these OTA (over the air) through the app. Therefore do install it as suggested. In particular, there are running bug fixes in new profiles coming out in about a week, so well worth it.Colin, please note the last para. Link to comment Share on other sites More sharing options...
96RAF Posted September 24, 2023 Share Posted September 24, 2023 There was a kind of flow chart diagram knocking about somewhere showing the relationship between the HM7K decoders and standard non-Bluetooth DCC only decoders and what kit was used to operate them in their various modes. I drafted it and from memory Rog drew it up all pretty, maybe he still has it. Link to comment Share on other sites More sharing options...
ColinB Posted September 24, 2023 Share Posted September 24, 2023 Fishmanoz, SteveM6 had already covered it, he also said that currently the upgrade wasn't available yet. So in the short term it will run on DCC which is the question I answered, if he wants to use the App, Pendragon has given a nice description on how to do it. The question was can he run it on DCC which he can without doing anything, if he wants to update it he can do it at his leisure. I know fully well that you can reprogram them again SteveM6 identified that, so why are you pointing me to the last paragraph. Reprogramming is delicate task which you only do when you have to, many people have "bricked" their phones where it has failed, now hopefully this app doesn't. Link to comment Share on other sites More sharing options...
Aussie Fred Posted September 24, 2023 Author Share Posted September 24, 2023 Thanks for all the help everyone, It is yet to leave the UK so expecting it in 7 to 10 days. Then I will see how I go. Link to comment Share on other sites More sharing options...
Fishmanoz Posted September 24, 2023 Share Posted September 24, 2023 Colin, I have pointed you to my last para to ensure you are aware that there will be greatly improved profiles out in a week or so that you will benefit from installing. But can only be done via the app, not by DCC. Link to comment Share on other sites More sharing options...
ColinB Posted September 24, 2023 Share Posted September 24, 2023 I know that Fishmanoz, but thank you for the advice. I don't thing anyone has implemented programming over DCC although many decoders say you can do it, but obviously not for HM7000 anyway. I think the profile fitted to my West Country is ok, but I will update it to see if it works better. Link to comment Share on other sites More sharing options...
Aussie Fred Posted October 12, 2023 Author Share Posted October 12, 2023 My "The Black Watch" has arrived and yes it ran perfectly out of the box on DCC - Just love that Deltic sound, only a short run, more laterBUT and that is a huge BUT, it is not a NEM coupling, so I will have to cut the couplings off and fit the NEM sockets that I got from West Hill Wagon Works, which will probably void its warranty. I will have to check with Hornby Customer service on that. Link to comment Share on other sites More sharing options...
96RAF Posted October 12, 2023 Share Posted October 12, 2023 It is apparently the old Lima tooling dressed as a Railroad version, so given you get a sound fitted loco for the price of a high end sounder decoder, there has to be compromise, such as it is rumoured to be a scale foot too short.If you want accurate and NEM go for the much more expensive H-D DP1 variant. Link to comment Share on other sites More sharing options...
Aussie Fred Posted October 12, 2023 Author Share Posted October 12, 2023 Yes I noticed it is about (1/2") shorter than my Bachmann "Meld" model, but all my other Railroads have NEM couplings. It shouldn't be too hard for me to fit the socket and if I want to go back to the old style couplings with it, I have plenty of those couplings spare that fit into the NEM socket. Link to comment Share on other sites More sharing options...
Aussie Fred Posted October 17, 2023 Author Share Posted October 17, 2023 Got confirmation from Hornby CustomerCare that it will not void warranty to cut off coupling, so here goes. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now