Alan564017 Posted June 4, 2011 Share Posted June 4, 2011 got me an elite, love it. but....... I have to rotate the control knob a quite a number of times to get the loco's to a decent speed (you can see the wedges appear on the display) is this normal ? do I have to around with acceleration rates?, the opposite slowing down. Also, nearly all of my loco's making a 'grind sound' when moving (very) slowly, this does not sound right, any thoughts? Link to comment Share on other sites More sharing options...
Rog RJ Posted June 4, 2011 Share Posted June 4, 2011 The rotary control do require quite a few turns to reach top speed. These controls are "speed sensitive" to some extent. If you move them very slowly it takes 2 "clicks" or "notches" to get an increase of 1 segment on the display but if you move them quickly less "clicks" are needed to get the same speed shown on the display. I tend to rest one finger on the rim of the control knob and "whiz" it round to get the speed up. The grinding noise seems to be worse on certain models (the Pendolino is absolutely awful on DCC at low speed) and depends on what make of decoder is fitted, cheaper decoders are usually the culprits. Rog :-)Rog :-) Link to comment Share on other sites More sharing options...
Alan564017 Posted June 4, 2011 Author Share Posted June 4, 2011 Rog (RJ) said: The rotary control do require quite a few turns to reach top speed. These controls are "speed sensitive" to some extent. If you move them very slowly it takes 2 "clicks" or "notches" to get an increase of 1 segment on the display but if you move them quickly less "clicks" are needed to get the same speed shown on the display. I tend to rest one finger on the rim of the control knob and "whiz" it round to get the speed up. The grinding noise seems to be worse on certain models (the Pendolino is absolutely awful on DCC at low speed) and depends on what make of decoder is fitted, cheaper decoders are usually the culprits. Rog :-) Rog :-) Thanks Rog, getting used to the rotary control. The decoders are the cheapest you can get so maybe thats the problem, got them on flea bay Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.