Marky1966 Posted July 15, 2013 Share Posted July 15, 2013 Hi guys I've just fitted a dcc decoder into my sons railroad scotsman and just carnt get the body to fit back on because of lack of room any ideas? Link to comment Share on other sites More sharing options...
Fishmanoz Posted July 15, 2013 Share Posted July 15, 2013 Hi Marky, welcome to the forums. If you are talking about the one that comes in the current train set which is DCC ready, I can assure you it does fit so keep trying and you will get there. However, there are many versions. Take a look at the Bromsgrove Models site http://www.bromsgrovemodels.co.uk/decoderinstallation4mm.htm#hornbyst where there is information on some more of them. Link to comment Share on other sites More sharing options...
Marky1966 Posted July 16, 2013 Author Share Posted July 16, 2013 Thanks guys , the chimney trick did it ,very stressful night I have to say Link to comment Share on other sites More sharing options...
81F Posted July 28, 2013 Share Posted July 28, 2013 Although locos say they are DCC ready I often find its difficult to get all that wire in! The Blue Box teams Hall is the worst resulting in filing away some of the body! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.