tony_rigby_uk Posted August 11, 2013 Share Posted August 11, 2013 1) If I put a Loco on the track will rail master see it? run it? or do I have to set it up, and read CV's? 2) on the top right you have Internet, Controller, Loco Detection, loco detection isn't lit up should it be??? This is annoying th life out of me know. I can read the Loco's CV's but can't run them nothing moves. speed bar goes up. but nothing happens. Yet I can read their CV's, one is DCC ready. the other for eliminating it being a dodgy loco is converted. Both run on DC with the R8249. both can be read using the programing outputs on the e-link.. Both will not run !!!!! should they be seen before this and give a ID of 03???? should the loco detection icon be green?????? Do I need to re-install railmaster?? has something gone wrong??? i'm getting supply to track it's just not moving them Link to comment Share on other sites More sharing options...
Graskie Posted August 11, 2013 Share Posted August 11, 2013 Ignore - duplicate post. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.