james_shearing2 Posted July 28, 2014 Share Posted July 28, 2014 I have recently bought the mixed freight digital train set, and i have set it up as shown. And have programed in the locos but am unable to correct the locomotive diretion in corraspondace to the 'Select' unit.Have tried the way it shows in the operators manual, but still no joy.Can any one help? Link to comment Share on other sites More sharing options...
Graskie Posted July 28, 2014 Share Posted July 28, 2014 Welcome to the forum, James. You do realise the front end is the grille end, don't you? The cab end is the back end. A lot of people don't realise that. Do you still need to change direction? Link to comment Share on other sites More sharing options...
james_shearing2 Posted July 28, 2014 Author Share Posted July 28, 2014 Yep i do relise that that is the front. But i still need to change the direction as the green light is pointing the opposite way the train is traveling. Link to comment Share on other sites More sharing options...
Graskie Posted July 28, 2014 Share Posted July 28, 2014 Is the green light you're referring to on the Select, James? Link to comment Share on other sites More sharing options...
Fishmanoz Posted July 28, 2014 Share Posted July 28, 2014 There is an error in the Select manual. To change the loco direction now, you must hold down the 0 and the unlit direction keys together. Link to comment Share on other sites More sharing options...
james_shearing2 Posted July 31, 2014 Author Share Posted July 31, 2014 Ok, ill try it! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.