DJRSPURS Posted February 1, 2015 Share Posted February 1, 2015 sometime ago I bought the two car Brighton Belle unit and had problems with the motor malfunctioning. I replaced the decoder but to no avail. I was subsequently sent a complete motor coach replacement. Now the internal lights have stopping operating and I have tried a reset of the decoder to no avail. I also purchased the two car suburban unit but due to moving country have only recently used this for the first time. I assume this shares the sales DCC and motor components as the the Brighton Belle. This worked fine until out of the blue it stopped responding on the track. Again I tried a reset but to no avail. however when it is on the programming track it moves very slightly when I try to reset it.am I unlucky or is the DCC in these units an issue? I now live in Aucklandl and am unsure where I can take these for repaircheers David Link to comment Share on other sites More sharing options...
DJRSPURS Posted February 1, 2015 Author Share Posted February 1, 2015 Obviously meant unresponsive! Admin edit: Fixed typo in title Link to comment Share on other sites More sharing options...
Rog RJ Posted February 3, 2015 Share Posted February 3, 2015 It may be worth resetting your controller if it's a Select or an Elite. Resetting has been known to cure all sorts of problems. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.