TIgersmike Posted February 15, 2015 Share Posted February 15, 2015 I am a newcomer to operating a Hornby system and a relative innocent in computer matters so I need some help with the hand held app on my iPad. I have loaded it up and all is connected with no problem. I have upgraded it and all my locos and track plan are shown as they should be. However, when I press the cruise or shunt buttons nothing happens. I know the app is connected because when I press the sound function buttons for my tts locos they work fine. Any help and advice will be welcome. Link to comment Share on other sites More sharing options...
Fishmanoz Posted February 15, 2015 Share Posted February 15, 2015 Mike, do you mean the throttle doesn't work at all, either with the slider or the buttons? My suggestion would be to email this one to RM Support from within the Help window of RM. Link to comment Share on other sites More sharing options...
TIgersmike Posted February 16, 2015 Author Share Posted February 16, 2015 Mike, do you mean the throttle doesn't work at all, either with the slider or the buttons? My suggestion would be to email this one to RM Support from within the Help window of RM.Yes. The throttle will not operate at all - neither the buttons nor the slider. Thanks for the advice, Fishmanoz, I will contact RM Support. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.