isaac1357924680 Posted June 8, 2011 Share Posted June 8, 2011 Some questions: 1. if you have a select connected as a walkabout to another select, can you control the your points on the walkabout. 2. if not, can you programme 2 controlers on one layout without using it as a walkabout. any help would be good :) Link to comment Share on other sites More sharing options...
poliss Posted June 8, 2011 Share Posted June 8, 2011 Never connect two Selects to the same layout. You will destroy both controllers. As far as I know you can control point decoders with a Walkabout.-----------------------------Get off the line Bobby. Link to comment Share on other sites More sharing options...
rigrun Posted June 8, 2011 Share Posted June 8, 2011 You can connect up to eight select walkabouts to either a select or an elite, and you should be able to control point s with either. What you must not do, is to connect two mains powered selects or elites to the same layout. Link to comment Share on other sites More sharing options...
rigrun Posted June 8, 2011 Share Posted June 8, 2011 Click this this should help you https://www.hornby.com/hornby-dcc/controllers/">https://www.hornby.com/hornby-dcc/controllers/ Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.