scifitrain Posted July 16, 2015 Share Posted July 16, 2015 Hello,I'm new with Elite, eLink-Set with Railmaster. Now I have to add the LDT 1-Dec-DC Decoder (for the digital switching of single coil turnout drives with one 12V impuls) for my N-Gauge Tomix turnouts. How can I add it?(Playing manual with switchyard, passenger trains should run automatic controlled.) Track occupancy and/or feedback with reaction by (eLink-) Railmaster, may be possible by Railmaster task? (E.g. - If train at point A then signal red or turnout right.). I need it for more then one train (random run).Thanks for reply and help.Regards from GermanyChristian Link to comment Share on other sites More sharing options...
tony_forward Posted July 16, 2015 Share Posted July 16, 2015 Hi Christian, welcome to the forum. track occupancy or feedback is not yet available with Railmaster/elink.as you will see from other threads on this forum, it is avidly awaited by some but as yet no date has been forthcoming. Link to comment Share on other sites More sharing options...
scifitrain Posted July 17, 2015 Author Share Posted July 17, 2015 Hello Tony,thanks for answer. Yes I know. But hoping for some tricky guys, who solved the lack on other ways.Christian Link to comment Share on other sites More sharing options...
tony_forward Posted July 17, 2015 Share Posted July 17, 2015 Mark 1 eyeball I suspect :) Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.