david_beazer Posted August 2, 2015 Share Posted August 2, 2015 Hi. Does the Arc one power base come with a switch to reverse direction ?Reason - I have an anologue long track which I have wired up via a switch(was a tricky mod) which means I can run races in either directions by a flick of a switch.Or would I need to have 2 powder bases fitted to track to run in opposite directions and run the actual mains power feed via a switch so they could not both be powered up at the same time. Obviously you would need to plug controllers into whichever one is switched to power. Link to comment Share on other sites More sharing options...
Andy P. Posted August 2, 2015 Share Posted August 2, 2015 Hi Dave,The sensors only work in one direction on ARC ONE AFAIK i.e. clockwise. While you could fit two in opposite directions I am not sure if there could be a problem with the circutiry... Link to comment Share on other sites More sharing options...
Squanto Posted May 26, 2019 Share Posted May 26, 2019 Andy would you happen to know if the arc Pro has the ability to switch directions? Link to comment Share on other sites More sharing options...
Andy P. Posted May 26, 2019 Share Posted May 26, 2019 No. All ARC powerbases only work in one direction. If you want to use it in the other direction you have to turn it around 180°.Many users have done this without problems. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.