[Brass gear fitting tips?]

I use a small G clamp.

 

https://www.amazon.co.uk/Amtech-W5690-Heavy-Clamp-2-Inch/dp/B00LQQY7PQ/ref=sr_1_7?keywords=Small+g+clamp&qid=1576592237&sr=8-7

Using my old account  to bypass waiting 24 hours to post again, how do you use a g clamp your way to press the gear on? I never used a g clamp before and would like to know how to use it properly

[Hornby Tender Drive connection issues]

thanks for all the replys, i was able to fix the connection issue.

[Hornby Tender Drive connection issues]

update: i just tested anthor loco , it might be the track in general because i have anthor margate made loco, leeds united and it does the same thing, except im not using the LMS tender, im useing the original tender with the leeds united loco. i will clean the track

[Hornby Tender Drive connection issues]

i live in america so i just have  simple bachmann track and transformer, i cleaned everything, still no luck. im starting to think it is the bare chassis part, what does the bare chassis part even do? S.4557 for anyone who needs to know what part it is. i replaced the coupler on the back of the princess elizabeth model, still no luck, i think i should add some weights in the back, for some reason it seems to go when theres more pressure put on the back..

[Hornby Tender Drive connection issues]

no luck. i think it maybe the entire front chassis in general, a short circuit or something. but theres no wires in the chassis on the front though. i cleaned everything the other day, stripped the entire thing down and gave a good clean, but however when i move the coupling part up to the top of the brass pin on the tender, the motor runs normally. i have a spare connecting pin but it does the same thing, what a mystery! what should i do in order to fix this if you guys know how to? pretty sure its a connection issue. the motor runs fine on other chassis'es....  ☹️

[Hornby Tender Drive connection issues]

hello thank you for replying. the princess loco does not run with anthor motor attached to it, i will try these solutions

[Hornby Tender Drive connection issues]

hello everyone i have a old Hornby Margate Made 1993-1994 Princess elizabeth locomotive, the model is very jerkish on the rails and sometimes doesnt move at all, i checked to make sure everything is clean, the wheels, anything else that can pick up electricity, and it is, the motor runs fine when connected to anthor margate made chassis, Is there some kind of short circuit or issue with the chassis in general, or is it just a connection problem? the track is cleaned and everything. Awaiting a answer for this issue. thank you.