froudy2004 Posted December 25, 2011 Share Posted December 25, 2011 Hi, recently got a Mallard live steam set, only to find after a couple of runs that the steam line that connects the tender to the loco has broken. Is there anywhere I can get a spare assembly or is there another way of fixing it? Thanks, David Link to comment Share on other sites More sharing options...
60157 Posted December 26, 2011 Share Posted December 26, 2011 hi would say be easyer to send it to hornby for repair as you probably wont be able to get the parts you need anywere else as they have stoped doing them send it to the repairs deptment and it should be fine as i have in the past there service is first class good luck 60157 Link to comment Share on other sites More sharing options...
bonnergen Posted December 26, 2011 Share Posted December 26, 2011 60157 said:hi would say be easyer to send it to hornby for repair as you probably wont be able to get the parts you need anywere else as they have stoped doing them send it to the repairs deptment and it should be fine as i have in the past there service is first class good luck 60157 Link to comment Share on other sites More sharing options...
bonnergen Posted December 26, 2011 Share Posted December 26, 2011 Yes That would be My suggestion to as Hornby servive is first class and they would sevicee and test the engine at the same time so You know it will be OK when you get it back Happy Steaming and Happy New Year Everyone Link to comment Share on other sites More sharing options...
Go_West Posted December 29, 2011 Share Posted December 29, 2011 [reply]froudy2004 Hi send me your address and i will send you one Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.