Pyskik Posted December 5, 2011 Share Posted December 5, 2011 i have read in my manual that my hornby select DCC controller can power non digital accessories from the aux output but when I link it up my my points it doesnt workDoes anyone have a solution Link to comment Share on other sites More sharing options...
FinnerZ Posted December 5, 2011 Share Posted December 5, 2011 While the non digital accessories can be wired up, I would not recomend it. I find that the power required to flick the point is too much for the select's one amp transformer and results in the unit restarting. I may be wrong but I believe a Horby 4 amp transformer may solve this, but another option is to have a separate 15 volt power suply, such as the two nut/bolt things on the front of the old black hornby controllers. Good luck. Link to comment Share on other sites More sharing options...
poliss Posted December 6, 2011 Share Posted December 6, 2011 Do you have passing contact switches for your points? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.