geochoice Posted June 26, 2017 Share Posted June 26, 2017 Hi, it has been ages since I was last here and I have just altered my layout slightly and everything has one fine, all the point decoders work etc. The one thing that is beating me is this. My schematic is quite large and on my previous design I viewed and operated it in 75% which was great and I could see and operate everything. Now I have added a few sidings the plan is not really any larger but how do I get it to resize please? I recall that once I got the general size correct I was able to adjust the position on the screen via the Plan buttons and x and y axis. But first I need to get the view size correct. I cannot seem to find a percentage scale button on the main screen, I see it on the design screen and save it but it goes full size when going onto the operating screen. Help please? Thanks, George Link to comment Share on other sites More sharing options...
RB51 Posted June 26, 2017 Share Posted June 26, 2017 Can you see this button George? R- /media/tinymce_upload/e03625f5c936c5bd6fe657cc1f180c51.JPG Link to comment Share on other sites More sharing options...
geochoice Posted June 26, 2017 Author Share Posted June 26, 2017 I think I have found it :-) the touchscreen icon had covered the % icon. Will post a picture later of what I have done, Thanks Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.