Tuipiri Posted December 27, 2011 Share Posted December 27, 2011 Hi all, I posted this problem over at Hornby DCC but thought someone could help here too. Downloaded Railmaster evaluation yesterday, got it to work, connected my elite to PC via USB. It didn't read from Railmaster no did it work with railmaster in any way. I then removed my elite from my PC by unhooking USB cable. This afternoon I turned on my Elite (now not connected at all to PC and no usb connection).I see the green light flashing as it turns on BUT...no screen showing! Tried to link up again to PC but nothing. So in summary I cannot see the Elite screen. It means I cannot access the menu or any loco control. I also cannot reset the usual way. It is using version 1.4. Any suggestions? Link to comment Share on other sites More sharing options...
Augustus Caesar Posted February 5, 2012 Share Posted February 5, 2012 Don't know if this is answered elsewhere but it seems like the new firmware is not installed correctly. This is what happens when that scenario crops up. Try reinstalling the firmware.This is a 40 day old post so maybe you know this already. Hope you get or got it working. Link to comment Share on other sites More sharing options...
ModelerXYZ Posted February 9, 2012 Share Posted February 9, 2012 I've had that problem. Re-install the firmware. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.