olly Posted October 18, 2017 Share Posted October 18, 2017 My class 31 that I have fitted a TTS decoder to is jumping forward about 2mm when the sound has finished it's startup routine Link to comment Share on other sites More sharing options...
96RAF Posted October 19, 2017 Share Posted October 19, 2017 Try CV150 on 1 to start with before adjusting CV151 or 152.Rob Link to comment Share on other sites More sharing options...
olly Posted October 19, 2017 Author Share Posted October 19, 2017 Try CV150 on 1 to start with before adjusting CV151 or 152.Rob I have reset the loco then changed CV150 to 1 and it is still jumping on sound startup. have cleaned the wheels not that they were dirty to make sure it's not anything silly like that getting very fed up with this loco a decoder it's been nothing but trouble since I fitted the TTS sound Link to comment Share on other sites More sharing options...
96RAF Posted October 19, 2017 Share Posted October 19, 2017 If it didn't do it with a normal decoder then I would refer the TTS decoder back to Hornby as faulty, especially after it has been reset and that made no difference.Give HCC a shout.Rob Link to comment Share on other sites More sharing options...
olly Posted October 19, 2017 Author Share Posted October 19, 2017 The decoder has already been back to hornby once because the sound was very low volume they tested it and said the sounds are as recorded and the decoder was working ok I may send them an email to see what they have to say about the jumping forward issue thanks Rob for your help 😆 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.