rallyman Posted December 18, 2017 Share Posted December 18, 2017 Got a DCC class 47 with the wires have come off the power buddy the wires are all black and I have four that need to be connected back on to the motor bogie anyhelp or wiring diagram will be appreciated. Link to comment Share on other sites More sharing options...
Howbi Posted December 18, 2017 Share Posted December 18, 2017 This is wiring shown on the service sheet.......it is very frustrating when you see eight coulours to the DCC socket but the connecting leads are all black.........if you trace the dummy bogie power pick-up leads (left & right) back to the socket you will know which ones feed to the power bogie pick-ups......then the two remaining wires will be to the motor.......a look at the pin colour codes diagram will show which is left & right but this is not crucial........if it runs wrong way you could correct via a CV change.......HB/media/tinymce_upload/cb1a64f1a4eea9dd488adc331f36edd4.jpg/media/tinymce_upload/ad44f07d603d2818e064cd53163303bc.jpg Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.