petanquematt Posted January 5, 2018 Share Posted January 5, 2018 I bought my son his first scalextric for xmas. At first everything was fine and we was having fun racing each other with a few crashes etc, but after about 1hr of intermitent play (more pressies to ope) we went back to racing and one of the controlers doesnt seem to work properly, even with the slightest touch the car goes off the track. The other controler works fine. this is so frustrating. If it helps the set is the scalextric street racers Thanks Link to comment Share on other sites More sharing options...
Andy P. Posted January 5, 2018 Share Posted January 5, 2018 You may want to contact where you purchased the set from (you have every right to do so) or please contact Scalextric Customer Support (link on the right-hand side of this page) Link to comment Share on other sites More sharing options...
Upgrader Posted January 14, 2018 Share Posted January 14, 2018 Carefully open up the controller (3 screws) I suspect that the rheostat pad (rectangular shape) is no longer sitting firmly in holding slots. Gently push down into position. Left side lower than right and then replace screws and test. This fixed it for me. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.