ashmash Posted January 26, 2018 Share Posted January 26, 2018 Just changed from Select to Railamster and elink. All DCC engines succesfully installed. On Select I could run the odd analouge train from programme "0" Is this function available through railmaster/elink - I have tried the forums but seem to draw a blank.Most grateful for any suggestions Link to comment Share on other sites More sharing options...
96RAF Posted January 26, 2018 Share Posted January 26, 2018 RM and eLink does not support running analogue locos.Rob Link to comment Share on other sites More sharing options...
ashmash Posted January 26, 2018 Author Share Posted January 26, 2018 Thank you for you confirmation of action Link to comment Share on other sites More sharing options...
Chrissaf Posted January 26, 2018 Share Posted January 26, 2018 And even if you could, we would advise against it..Numerous posts on here on why using DCC address Zero for analogue is not a good idea. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.