Tts ecos controller

[paul_knowles]

Am having problems with my tts hst old decorders wont program on the test track any ideas bur it did once before just want my hst to run on my layout 

[96RAF]

It was an Ecos that first reported TTS compatibility problems. Can you control or program your HST if it is turned around on the track. If so then you need to contact HCC to get them reprogrammed.

 

There is much discussion about TTS and Ecos both on here and on RM Web forums, including talk about getting the Ecos updated.

Rob

[Chrissaf]

Follow link for information on Hornby TTS firmware upgrade

https://www.hornby.com/uk-en/forum/hornby-tts-decoders-reported-problems/

[96RAF]

Start here in RM Web Forums and also follow the link at the end, noting most of the discussion was in 2017 .

http://www.rmweb.co.uk/community/index.php?/topic/125527-ecos-and-latest-tts-decoders/page-2

 

In the end I think it boils down to getting Hornby to reprogram your HST decoders.

Rob

[paul_knowles]

It was an Ecos that first reported TTS compatibility problems. Can you control or program your HST if it is turned around on the track. If so then you need to contact HCC to get them reprogrammed.

 

There is much discussion about TTS and Ecos both on here and on RM Web forums, including talk about getting the Ecos updated.

Rob

Hi rob i cant do anything it wont find them on the programme track but it did once when i had problems wiyh it so i just put it on the shelf and left it there ill try hornby see what thry have to say 

 

Thanks Paul