Iliketransport Posted December 2, 2018 Share Posted December 2, 2018 My Hornby Select is not working with a Dapol imperium chip. Does anyone know why?I've heard the Hornby select sometimes has incompatibility problems. Could that be the problem? Link to comment Share on other sites More sharing options...
2e0dtoeric Posted December 2, 2018 Share Posted December 2, 2018 Which update version is your Select loaded with?When you first switch it on, a series of numbers appear on the screen - what are they?Early models were very fussy, but recent updates have 'sorted' most of this.You will have to send it back to Hornby to be updated, you cannot do it yourself, like on the Elite. Link to comment Share on other sites More sharing options...
96RAF Posted December 2, 2018 Share Posted December 2, 2018 I seem to remember there was discussion about Imperiums on the RMWeb forum - either Hornby or DCC sections. Not sure if it was associated with the Select or it was another controller or problem.Rob Link to comment Share on other sites More sharing options...
Iliketransport Posted December 3, 2018 Author Share Posted December 3, 2018 Which update version is your Select loaded with?When you first switch it on, a series of numbers appear on the screen - what are they?Early models were very fussy, but recent updates have 'sorted' most of this.You will have to send it back to Hornby to be updated, you cannot do it yourself, like on the Elite.When I power it up it shows 15 30 03 which I think is 1.5 firmware. I think it's probably an incompatibility problem. Thanks for the helpIwan Link to comment Share on other sites More sharing options...
Chrissaf Posted December 3, 2018 Share Posted December 3, 2018 Yes, that is the currently latest version 1.5 firmware. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.