Chrissaf Posted January 14, 2019 Share Posted January 14, 2019 What light do you mean?Interior cab light?Front directional light - white?Rear directional light - red?Some other light that you haven't specified? If you mean the directional white & red lights, then have you used the controller to send a function F0 command to turn the directional lights 'on'. Do this after you have confirmed that the loco moves back and forth under DCC controller control, then you know that you have the correct loco called up. Link to comment Share on other sites More sharing options...
96RAF Posted January 14, 2019 Share Posted January 14, 2019 Sometimes directional lights will not work until the decoder and/or controller are set to 128 speed steps.Rob Link to comment Share on other sites More sharing options...
Chrissaf Posted January 14, 2019 Share Posted January 14, 2019 Hi all Have a Backmann Class 44 Sound i cant get the light working on it now i did have a Backmann Controler the light work ok i am now on Railmaster Elite Controler the Loco run fin but no light can any one helpThank Ron. Link to comment Share on other sites More sharing options...
ron 47 Posted January 14, 2019 Share Posted January 14, 2019 the loco light i have use F0 but no light come on i will try 128 Speed StepsThank Ron Link to comment Share on other sites More sharing options...
Chrissaf Posted January 14, 2019 Share Posted January 14, 2019 Tell us what value you have for CV29 and we can then tell you if you have 128 speed steps enabled or not. Link to comment Share on other sites More sharing options...
Fishmanoz Posted January 14, 2019 Share Posted January 14, 2019 And unless you have been changing CV29, 128 speed steps is the default. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.