hugg Posted February 13, 2012 Share Posted February 13, 2012 Hi every OneHugg here can anyone tell me how the turntable works with railmaster or do you have to have a decoder in stalled to make it work with railmaster.Thanks Hugg Link to comment Share on other sites More sharing options...
Mike_G Posted February 13, 2012 Share Posted February 13, 2012 right ondecoder neededyou can use an outlet from the point decoder and change that one to continus outputor use a cheep decoder same as fitted in a locome i turn mine with a press button on the side of the baseboardi may change it later but it does for now (turntable dont get a lot of usesince i got rid of my steam locosjust use it to turn the class 20 sometimesmike Link to comment Share on other sites More sharing options...
grumpy old man Posted February 17, 2012 Share Posted February 17, 2012 Post a new reply... Link to comment Share on other sites More sharing options...
grumpy old man Posted February 17, 2012 Share Posted February 17, 2012 HiI fitted a cheap decoder, programmed it via Elite to a loco number and operate via ither Elite or railmaster as you would a locoDon R Link to comment Share on other sites More sharing options...
AUSLNER Posted March 14, 2012 Share Posted March 14, 2012 i fitted a hornby decoder to my turntable and it works very well. you have to remember to remove the power contacts and each outlet needs to be powered individually as well Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.