ron 47 Posted December 27, 2019 Share Posted December 27, 2019 HI all have purchest the new class 47 railroad. to find it will not go round the cornerswhen i got it a part the motor was touching the chassis stoping it from turning right. i think that there was a pice of plastic that had not been cut out .so remove this and now all is well i just wonder if any one had had this problem or just me.Ron Link to comment Share on other sites More sharing options...
walkingthedog Posted December 27, 2019 Share Posted December 27, 2019 Perhaps the curve was too tight. Link to comment Share on other sites More sharing options...
atom3624 Posted December 27, 2019 Share Posted December 27, 2019 Which radius curves are you using Ron? The 'default' minimum radius for all larger radius locomotives is 2nd radius nowadays. It used to be just the higher detail locos, now its more-or-less all of them. Only smaller locos will get around the 1st radius - and very old ones if the flanges have been re-profiled. Al. Link to comment Share on other sites More sharing options...
ron 47 Posted December 28, 2019 Author Share Posted December 28, 2019 Hi all no i have 4 radius curevs but have sort out as when the loco when round righ hand curve it lock up there was a bit that had not been cut out of the chassis when built i have remove this and now the loco run finRon. Link to comment Share on other sites More sharing options...
Modelnut19 Posted December 28, 2019 Share Posted December 28, 2019 Well done for finding the cause. I have several earlier Mrgate and China-made Class 47 models and none have had that problem. A 4th radius curve is almost as easy as they come.More genrally, I have found that some model locos are fussier than others. Sometimes they prefer to run say anticlockwise rather than clockwise. I suspect this is to do with the pick-ups but a disater I had with a 2005 Fowler tank engine means that I am loathed to tinker with them too much. Basically I tried to adjust the thin copper strips to improve the running and got it running perfectly only to try the other direction when it promptly chewed a pick-up. The situation deteriorated from there and I never managed to find spares. Link to comment Share on other sites More sharing options...
Iliketransport Posted December 29, 2019 Share Posted December 29, 2019 Well done for finding the cause. I have several earlier Mrgate and China-made Class 47 models and none have had that problem. A 4th radius curve is almost as easy as they come.More genrally, I have found that some model locos are fussier than others. Sometimes they prefer to run say anticlockwise rather than clockwise. I suspect this is to do with the pick-ups but a disater I had with a 2005 Fowler tank engine means that I am loathed to tinker with them too much. Basically I tried to adjust the thin copper strips to improve the running and got it running perfectly only to try the other direction when it promptly chewed a pick-up. The situation deteriorated from there and I never managed to find spares. When I can't find spare pickups I simply cut some metal to shape and size and use that! Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now